Firmadoor Series 2 Industrial
• Lightweight for easy operation
• Weatherseal to prevent moisture and dust
• Smooth & Quiet Operation
• Available in a range of colours
• Waist high locking for ease of operation
• Mullions, Wicket Gates & Ventilation options
Sizes
• All doors are custom made to suit individual openings up to 5100mm high x 5100mm wide.
Curtain
• Manufactured from 0.4mm gauge, flexible steel curtain pressed to a horizontal ribbed profile, sliding between vertical guides.
Operation
• Gearing assembly is mounted inside the door roll minimising side clearance requirements
• Low operating effort to open and close very large doors.
• Doors up to 2400mm high can be operated by hand without the need of chain wheel equipment
• Doors between 2400mm and 3000mm use direct chain drive
• Doors over 3000mm high use efficient, compact, planetary reduction gearing.
• Nylofelt® used to minimise friction at the working surface ensures continuous smooth, quiet operation, without so much as a touch of lubricant, an ongoing benefit of this product.
Finish
• Available in a wide range of Colorbond® and Zincalume® finishes available.
Bottom Rail
• Aluminium bottom rail with weatherseal provides added protection against dirt, leaves and weather.
Options
• Mullions – where a choice of partial or total access to the building is required.
• Electrical and remote operation are available.
• Wicket gates for quick and easy access in or out of the premises, without the need to raise the door.
• Where ventilation is required the doors may be partially or fully perforated to allow light penetration or up to 10% airflow.
Locking
• Waist high heavy duty locking system.
• Sliding bolt locking is located internally on the left hand side of the door.
• Options available on request:
1. Chain locking
2. Waist high internal slide bolt locking can be located on the right hand side or optional on both sides.